THADEN ARMORY HOME
Home

Merchandise
Buckles
Hinges
SCA Equipment
Miscellaneous
Cookware

Special Deals

Miscellaneous


 
TA-Liner-01
Dimensions: Aproximately
Liner Installed $150.00
  Helmet liner based on surviving examples, being constructed of linen and cotton. All hand stitched. Please email for details.
Just the Liner $125.00

 

TA-Liner-02
Dimensions:

 

Liner installed $100.00
  Bevor liner based on surviving examples, being constructed of linen and cotton. All hand stitched. Please email for details.
Just the Liner $75.00

 
Large 6 Lobed brass or steel washer
Dimensions: 1 1/6" wide with 1/8" rivet hole (rivets not included)
$12.00
per 10
  Rosette can be used to act as a decorative washer when attaching straps to your armour. Please specify Mild Steel OR Brass. Sold in packs of Ten

 
Large 8 Lobed brass or steel washer
Dimensions: 1 1/6" wide with 1/8" rivet hole (rivets not included)
$12.00
per 10
  Rosette can be used to act as a decorative washer when attaching straps to your armour. Please specify Mild Steel OR Brass. Sold in packs of Ten

 
Small 6 Lobed brass or steel washer
Dimensions: 13/16" wide with 1/8" rivet hole (rivets not included)
$12.00
per 10
  Rosette can be used to act as a decorative washer when attaching straps to your armour. Please specify Mild Steel OR Brass. Sold in packs of Ten

 
Small 8 Lobed brass or steel washer
Dimensions: 13/16" wide with 1/8" rivet hole (rivets not included)
$12.00
per 10
  Rosette can be used to act as a decorative washer when attaching straps to your armour. Please specify Mild Steel OR Brass. Sold in packs of Ten

 
TA-Grommet-01
Dimensions: 1/4" shank with 3/16" through hole, 1/2" tall
$9.00
per pair
  This style of grommet is used where items of armour are pointed, or tied, to a doublet or arming coat, they are set through a 1/4" hole as a tubular rivet. Grommets are used to extend the wear life of your points by reducing wear.
Based on 15th century examples.
Item is sold in pairs.

 
TA-Lock-01
Dimensions: Lock plate is 3" X 4" with a 6 1/2" hasp
$169.95
 

Small medieval based lock will work great on any chest or trunk . It requires a 1/2" deep recess in the wood for the mechanism. A template will be supplied. Due to the handmade nature of these items slight variations will occur.

Shipping and handling on this item is set at $7.75 for the first one with a $2.00 charge for each additional lock.
(Shown with a 6" rule for comaprison)



 
TA-Lock-02
Dimensions: Lock plate is 5" X 6" with a 8 1/2" hasp
$179.95
  Large medieval based lock will work great on any chest or trunk . It requires a 1/2" deep recess in the wood for the mechanism. A template will be supplied. Due to the handmade nature of these items slight variations will occur.

The shipping and handling on this item is set at$ 7.75 for the first one with a $2.00 charge for each additional lock.
(Shown with a 6" rule for comaprison)



 
TA-Lock-03
Dimensions: Lock plate is 5" X 6" with a 8 1/2" hasp
$199.95
  Double hasped large medieval based lock will work great on any chest or trunk . It requires a 1/2" deep recess in the wood for the mechanism. A template will be supplied. Due to the handmade nature of these items slight variations will occur.

The shipping and handling on this item is set at$ 7.75 for the first one with a $2.00 charge for each additional lock.
(Shown with a 6" rule for comaprison)



 
Italian Styled Lance Rest
Dimensions: 3 1/2" long with a 1 1/2" X 2 1/8" base plate
$240.00
  Hand made steel lance rest based on mid to late 15th century Italian examples. This kit includes all the parts to retrofit your existing breastplate or, if building your own breastplate, this is a great way to finish it out. Includes a template for drilling the holes to align the staples properly.


 
Early Italian Styled Lance Rest
Dimensions: 3 1/2" long with a 1 1/2" X 2 1/8" base plate
$240.00
  Hand made steel lance rest based on an early 15th century Italian example held in the Churburg collection. This kit includes all the parts to retrofit your existing breastplate or, if building your own breastplate, this is a great way to finish it out. Includes a template for drilling the holes to align the staples properly.


 
CH S13 Style Bascinet Visor Pivot
Dimensions: 1" diameter X 7/16" tall, 1/4" diam X 1/2" long shank
$16.00
per pair
  Cast bronze bascinet visor pivot loosly based on the Churburg CH S13 bascinet visor pivots. Sold as a pair.

 
CH S15 Style Bascinet Visor Pivot
Dimensions: 1" diameter X 7/16" tall, 1/4" diam X 1/2" long shank
$16.00
per pair
  Cast bronze bascinet visor pivot loosly based on the Churburg CH S15 bascinet visor pivots. Sold as a pair.


 
Sallet Visor Pivot
Dimensions: 3/4" diameter X 9/16" tall, 1/4" diam X 1/2" long shank
$16.00
per pair
  Cast bronze sallet visor pivot. Sold as a pair.

Additional Items Coming Soon!